3D Sketcher

# 3D Sketcher
 
import salome
salome.salome_init_without_session()
import GEOM
from salome.geom import geomBuilder
geompy = geomBuilder.New()
gg = salome.ImportComponentGUI("GEOM")
 
# Create a 3D sketcher (wire) on the given points coordinates
sketcher1 = geompy.Make3DSketcher([ 0,0,0, 50,50,50, 0,50,0, 50,0,25, 10,20,100, 0,0,0 ])
 
# add object in the study
id_sketcher1 = geompy.addToStudy(sketcher1, "Sketcher1")
 
# display the sketcher
gg.createAndDisplayGO(id_sketcher1)
 
# Create a 3D sketcher (wire) with Sketcher3D interface
 
# get the interface instance
sk = geompy.Sketcher3D()
 
# add three points with absolute coordinates
# the first point will be the start point of sketcher
# two segments will be added by this command
sk.addPointsAbsolute(1,2,3, 7,0,0, 10,-3.5,-11)
 
# add one segment, defined by two angles in "OXY" coordinate system and length
sk.addPointRadiusAnglesRelative(45, 0, 100, "OXY")
 
# add three points with relative coordinates
# three segments will be added by this command
sk.addPointsRelative(20,0,0, 20,0,100, -40,0,-50)
 
# set to close the sketcher
sk.close()
 
# obtain the sketcher result
sketcher2 = sk.wire()
 
# add object in the study
id_sketcher2 = geompy.addToStudy(sketcher2, "Sketcher2")
 
# display the sketcher
gg.createAndDisplayGO(id_sketcher2)

Download this script