Version: 9.12.0
Class Hierarchy

Go to the graphical class hierarchy

This inheritance list is sorted roughly, but not completely, alphabetically:
[detail level 1234]
 CAdaptor2d_Curve2d
 CAdvancedEngine_IDividedDisk
 CAdvancedEngine_IPipeTShape
 CAdvancedEngine_ISmoothingSurface
 CAIS_AngleDimension
 CAIS_DiameterDimension
 CAIS_InteractiveObject
 CArguments
 CBlockFix
 CBlockFix_CheckTool
 CBlockFix_UnionEdges
 CBlockFix_UnionFaces
 CBOPAlgo_Builder
 CBREPPlugin_IExport
 CBREPPlugin_IImport
 CCompareSectionToPoint
 CCppUnit::TestFixture
 CCurveCreator_DiffThis is the support class for store/retrieve differences of undo/redo operations
 CCurveCreator_Displayer
 CCurveCreator_ICurveThe CurveCreator_ICurve object is represented as one or more sets of connected points; thus CurveCreator_ICurve object can contain several not connected curves (polylines or b-splines), each such curve has two only ends "start and end points" in other words non-manifold curves are not supported
 CCurveCreator_ISectionThe type represents the interface to the curve section
 CCurveCreator_OperationThis is the support class that describes a modification operation that can be applied to CurveCreator_Curve
 CCurveCreator_PosPoint
 CCurveCreator_Utils
 CCurveCreator_UtilsICurve
 CEngines::EngineComponent
 CEngines_Component_i
 CEntityGUI_3DSketcherDlg::prsType
 CEntityGUI_3DSketcherDlg::XYZ
 CGEOM::CreationInformation
 CGEOM::GenericObjPtr< TInterface >A smart pointer for the SALOME GenericObj interface
 CGEOM::GEOM_IBlocksOperations::BCErrorDescription of Blocks Compound defect: type and incriminated sub-shapes
 CGEOM::GEOM_IInsertOperations::TransferDatumNon-topological information transfer datum
 CGEOM::GEOM_IKindOfShapeInterface for shape_kind enumeration
 CGEOM::GEOM_IMeasureOperations::CheckResultStructure for store result of check store type of check as number and failed shapes
 CGEOM::GEOM_IMeasureOperations::PairOfShapeMethods and structure for implement CheckConformity tool
 CGEOM::GEOM_IMeasureOperations::ShapeErrorDescription of a shape defect: type and incriminated sub-shapes
 CGEOM::GEOM_IShapesOperations::ExtractionStat
 CGEOM::GEOM_List
 CGEOM::ModifInfoReporting on shape healing
 CGEOM::ParameterObject creation parameters
 CGEOM::TPythonDump
 CGEOM_Annotation::OpenGl_Annotation::TextSize
 CGEOM_BaseObject
 CGEOM_Client
 CGEOM_Engine
 CGEOM_GenericOperationsCreator
 CGEOM_IField
 CGEOM_IOperations
 CGEOM_ISubShape
 CGEOM_Param
 CGEOM_Solver
 CGEOM_Swig
 CGEOMAlgo_Algo
 CGEOMAlgo_AlgoToolsAuxiliary tools for Algorithms
 CGEOMAlgo_BndSphere
 CGEOMAlgo_BndSphereTree::Selector
 CGEOMAlgo_BoxBndTree::Selector
 CGEOMAlgo_CoupleOfShapes
 CGEOMAlgo_GetInPlaceAPIThis is an API class for all GetInPlace algorithm
 CGEOMAlgo_GetInPlaceIteratorThe implementation of iterator of intersected shapes for Get In Place Algorithm
 CGEOMAlgo_GluerAlgo
 CGEOMAlgo_PassKey
 CGEOMAlgo_PassKeyMapHasher
 CGEOMAlgo_PassKeyShape
 CGEOMAlgo_PassKeyShapeMapHasher
 CGEOMAlgo_ShapeInfo
 CGEOMAlgo_StateCollector
 CGEOMAlgo_SurfaceTools
 CGEOMBase
 CGEOMBase_Helper
 CGEOMGUI_AnnotationAttrs::Properties
 CGEOMGUI_DimensionPropertyUtility class to unpack/pack dimension presentations as object property of study
 CGEOMGUI_DimensionProperty::Record
 CGEOMGUI_TextTreeWdg::VisualPropertyCommon interface for working with shape dimension and annotation properties of object in a unified way irrespectively of the implementation
 CGEOMImpl_Block6Explorer
 CGEOMImpl_Fillet1dGEOMImpl_Fillet1d is 1D fillet algorithm on two planar edges with given radius
 CGEOMImpl_Fillet1dPointGEOMImpl_Fillet1dPoint is an internal class for 1D fillet algorithm to store and compare computed solutions on edges
 CGEOMImpl_I3DSketcher
 CGEOMImpl_IArc
 CGEOMImpl_IArchimede
 CGEOMImpl_IBlocks
 CGEOMImpl_IBlocksOperations::BCError
 CGEOMImpl_IBlockTrsf
 CGEOMImpl_IBoolean
 CGEOMImpl_IBox
 CGEOMImpl_IChamfer
 CGEOMImpl_ICircle
 CGEOMImpl_ICone
 CGEOMImpl_IConformity
 CGEOMImpl_ICopy
 CGEOMImpl_ICurveParametricInterface to data of analytically defined curve
 CGEOMImpl_ICylinder
 CGEOMImpl_IDisk
 CGEOMImpl_IECallBack
 CGEOMImpl_IEllipse
 CGEOMImpl_IExtract
 CGEOMImpl_IFace
 CGEOMImpl_IFillet
 CGEOMImpl_IFillet1d
 CGEOMImpl_IFillet2d
 CGEOMImpl_IFilling
 CGEOMImpl_IGlue
 CGEOMImpl_IHealing
 CGEOMImpl_IImportExport
 CGEOMImpl_IInsertOperations::TransferDatum
 CGEOMImpl_IIsoline
 CGEOMImpl_ILine
 CGEOMImpl_IMarker
 CGEOMImpl_IMeasure
 CGEOMImpl_IMeasureOperations::FailedChecks
 CGEOMImpl_IMeasureOperations::ShapeError
 CGEOMImpl_IMirror
 CGEOMImpl_IOffset
 CGEOMImpl_IPartition
 CGEOMImpl_IPatchFace
 CGEOMImpl_IPipe
 CGEOMImpl_IPipePath
 CGEOMImpl_IPlane
 CGEOMImpl_IPoint
 CGEOMImpl_IPolyline
 CGEOMImpl_IPolyline2D
 CGEOMImpl_IPosition
 CGEOMImpl_IPrism
 CGEOMImpl_IProjection
 CGEOMImpl_IProjOnCyl
 CGEOMImpl_IProximity
 CGEOMImpl_IRevolution
 CGEOMImpl_IRotate
 CGEOMImpl_IScale
 CGEOMImpl_IShapeExtend
 CGEOMImpl_IShapes
 CGEOMImpl_IShapesOperations::ExtractionStat
 CGEOMImpl_ISketcher
 CGEOMImpl_ISphere
 CGEOMImpl_ISpline
 CGEOMImpl_IThruSections
 CGEOMImpl_ITorus
 CGEOMImpl_ITransferData
 CGEOMImpl_ITranslate
 CGEOMImpl_IVector
 CGEOMImpl_PolylineDumperThis is a helper class to form a dump of a polyline 2d curves creation algorithm
 CGEOMToolsGUI_MaterialPropertiesDlg::Reflection
 CGEOMUtils::ActionDataPlugin action data
 CGEOMUtils::CompareShapesSort shapes in the list by their coordinates
 CGEOMUtils::Hatcher
 CGEOMUtils::PluginDataPlugin data
 CGEOMUtils::Range
 CGEOMUtils::Trsf2d
 CGProp_GProps
 CGraphicsView_Object
 CGraphicsView_Viewer
 CGraphicsView_ViewPort
 CIGESPlugin_IExport
 CIGESPlugin_IImport
 CLightApp_Displayer
 CLightApp_GVSelector
 CLightApp_OCCSelector
 CLightApp_Selection
 CLocker
 CMaterial_Model
 CMaterial_Model::ReflectionData
 CMeasureGUI_DimensionCreateTool
 CMeasureGUI_DimensionCreateTool::Segment
 CObjectStates
 COpenGl_Element
 CPlaneAndSegment
 CPOA_GEOM::GEOM_BaseObject
 CPOA_GEOM::GEOM_BoolFieldStep
 CPOA_GEOM::GEOM_DoubleFieldStep
 CPOA_GEOM::GEOM_Field
 CPOA_GEOM::GEOM_FieldStep
 CPOA_GEOM::GEOM_Gen
 CPOA_GEOM::GEOM_I3DPrimOperations
 CPOA_GEOM::GEOM_IBasicOperations
 CPOA_GEOM::GEOM_IBlocksOperations
 CPOA_GEOM::GEOM_IBooleanOperations
 CPOA_GEOM::GEOM_ICanonicalRecognition
 CPOA_GEOM::GEOM_ICurvesOperations
 CPOA_GEOM::GEOM_IFieldOperations
 CPOA_GEOM::GEOM_IGroupOperations
 CPOA_GEOM::GEOM_IHealingOperations
 CPOA_GEOM::GEOM_IInsertOperations
 CPOA_GEOM::GEOM_ILocalOperations
 CPOA_GEOM::GEOM_IMeasureOperations
 CPOA_GEOM::GEOM_IntFieldStep
 CPOA_GEOM::GEOM_IOperations
 CPOA_GEOM::GEOM_IShapesOperations
 CPOA_GEOM::GEOM_ITestOperations
 CPOA_GEOM::GEOM_ITransformOperations
 CPOA_GEOM::GEOM_List
 CPOA_GEOM::GEOM_Object
 CPOA_GEOM::GEOM_StringFieldStep
 CPOA_GEOM::GEOM_Superv
 CPOA_GEOM::IAdvancedOperations
 CPOA_GEOM::IBREPOperations
 CPOA_GEOM::IIGESOperations
 CPOA_GEOM::ISTEPOperations
 CPOA_GEOM::ISTLOperations
 CPOA_GEOM::IVTKOperations
 CPOA_GEOM::IXAOOperations
 CPortableServer::RefCountServantBase
 CQAbstractItemModel
 CQDialog
 CQGraphicsLineItem
 CQGroupBox
 CQItemDelegate
 CQListWidget
 CQObject
 CQSignalBlockerThis class is named as QT class as it is introduced since Qt 5.3
 CQTableWidget
 CQTableWidgetItem
 CQThread
 CQTreeView
 CQTreeWidget
 CQTreeWidgetItem
 CQtxDialog
 CQtxResourceMgr
 CQWidget
 CSALOME::GenericObj
 CSALOME::GenericObj_i
 CSALOME_Actor
 CSALOME_AISShape
 CSALOME_Event
 CSALOME_InteractiveObject
 CSalomeApp_Filter
 CSalomeApp_Module
 CSALOMEDS::Driver
 CSection3DThis is an intermediate structure for curve construction
 CSelect3D_SensitiveBox
 CSelectMgr_EntityOwner
 CSelectMgr_Filter
 CShapeRec_FeatureDetector
 CShapeRec_ParametersParameters for the contour/corners detection
 CShapeUpgrade_SplitCurve2d
 CShapeUpgrade_SplitCurve3d
 CShHealOper_ModifStatsStructure describing modifications done in a shape
 CShHealOper_ModifStats::Datum
 CShHealOper_Tool
 CSketcher_Profile
 CSketcher_Profile::FunctorGeneric functor class to process sketcher command
 CSketcher_UtilsThis class represents a set of utils needed to compute sketcher geometry
 CStandard_Transient
 Cstd::exceptionSTL class
 CSTEPPlugin_IExport
 CSTEPPlugin_IImport
 CSTLPlugin_IExport
 CSTLPlugin_IImport
 CSUIT_FileDlg
 CSUIT_Operation
 CSUIT_SelectionFilter
 CSUIT_Selector
 CTDocStd_Application
 CTFunction_Driver
 CTObjectDataData of GEOM_Object
 CTVariable
 CUi::DlgRef_1Check1Spin1Check_QTD
 CUi::DlgRef_1List1Spin1Btn_QTD
 CUi::DlgRef_1Sel1Check1List_QTD
 CUi::DlgRef_1Sel1Check1Sel_QTD
 CUi::DlgRef_1Sel1Check_QTD
 CUi::DlgRef_1Sel1Frame_QTD
 CUi::DlgRef_1Sel1List1Check3Btn_QTD
 CUi::DlgRef_1Sel1Spin1Check_QTD
 CUi::DlgRef_1Sel1Spin_QTD
 CUi::DlgRef_1Sel2Spin1View1Check_QTD
 CUi::DlgRef_1Sel2Spin_QTD
 CUi::DlgRef_1Sel3Check_QTD
 CUi::DlgRef_1Sel3Spin1Check_QTD
 CUi::DlgRef_1Sel3Spin2Check1Spin_QTD
 CUi::DlgRef_1Sel3Spin_QTD
 CUi::DlgRef_1Sel5Spin1Check_QTD
 CUi::DlgRef_1Sel_QTD
 CUi::DlgRef_1SelExt_QTD
 CUi::DlgRef_1Spin_QTD
 CUi::DlgRef_2Sel1List1Check_QTD
 CUi::DlgRef_2Sel1List2Check_QTD
 CUi::DlgRef_2Sel1List_QTD
 CUi::DlgRef_2Sel1Spin2Check_QTD
 CUi::DlgRef_2Sel1Spin3Check1Spin_QTD
 CUi::DlgRef_2Sel1Spin_QTD
 CUi::DlgRef_2Sel1SpinInt_QTD
 CUi::DlgRef_2Sel2List_QTD
 CUi::DlgRef_2Sel2Spin1Check_QTD
 CUi::DlgRef_2Sel2Spin1Push_QTD
 CUi::DlgRef_2Sel2Spin2Push_QTD
 CUi::DlgRef_2Sel2Spin3Check_QTD
 CUi::DlgRef_2Sel2Spin_QTD
 CUi::DlgRef_2Sel3Spin1Check_QTD
 CUi::DlgRef_2Sel3Spin2Rb_QTD
 CUi::DlgRef_2Sel3Spin_QTD
 CUi::DlgRef_2Sel_QTD
 CUi::DlgRef_2SelExt_QTD
 CUi::DlgRef_2Spin_QTD
 CUi::DlgRef_3Check_QTD
 CUi::DlgRef_3Radio1Sel1Spin_QTD
 CUi::DlgRef_3Radio_QTD
 CUi::DlgRef_3Sel1Check_QTD
 CUi::DlgRef_3Sel1Spin_QTD
 CUi::DlgRef_3Sel2Check3Spin_QTD
 CUi::DlgRef_3Sel2Spin_QTD
 CUi::DlgRef_3Sel3Spin1Check_QTD
 CUi::DlgRef_3Sel3Spin2Check_QTD
 CUi::DlgRef_3Sel4Spin2Check_QTD
 CUi::DlgRef_3Sel_QTD
 CUi::DlgRef_3Spin1Check_QTD
 CUi::DlgRef_3Spin1CheckCyl_QTD
 CUi::DlgRef_3Spin_QTD
 CUi::DlgRef_4Sel1List1Check_QTD
 CUi::DlgRef_4Sel1List_QTD
 CUi::DlgRef_4Sel1Spin2Check_QTD
 CUi::DlgRef_4Sel1Spin3Check_QTD
 CUi::DlgRef_4Spin_QTD
 CUi::DlgRef_6Sel_QTD
 CUi::EntityGUI_1Sel1Spin1Check_QTD
 CUi::EntityGUI_1Sel_QTD
 CUi::EntityGUI_1Spin_QTD
 CUi::EntityGUI_2Sel1Check_QTD
 CUi::EntityGUI_2Spin_QTD
 CUi::EntityGUI_3Spin1Check_QTD
 CUi::EntityGUI_3Spin_QTD
 CUi::EntityGUI_4Spin1Check_QTD
 CUi::EntityGUI_4Spin_QTD
 CUi::EntityGUI_Angles_QTD
 CUi::EntityGUI_Controls_QTD
 CUi::EntityGUI_Dir1_QTD
 CUi::EntityGUI_Dir2_QTD
 CUi::EntityGUI_Point_QTD
 CUi::EntityGUI_Skeleton_QTD
 CUi::EntityGUI_Type_QTD
 CUi::MeasureGUI_1Sel12LineEdit_QTD
 CUi::MeasureGUI_1Sel1Check1TextView2ListBox_QTD
 CUi::MeasureGUI_1Sel1TextView1Check_QTD
 CUi::MeasureGUI_1Sel1TextView2ListBox_QTD
 CUi::MeasureGUI_1Sel1TextView_QTD
 CUi::MeasureGUI_1Sel3LineEdit_QTD
 CUi::MeasureGUI_1Sel6LineEdit_QTD
 CUi::MeasureGUI_1Sel_Frame_QTD
 CUi::MeasureGUI_1TreeWidget_4Button_QTD
 CUi::MeasureGUI_2Sel1LineEdit_QTD
 CUi::MeasureGUI_2Sel_Frame_QTD
 CUi::MeasureGUI_3Sel_Frame_QTD
 CUi::MeasureGUI_SkeletonBox_QTD
 CVolumeSection
 CvtkAlgorithm
 CvtkObject
 CvtkPainterPolyDataMapper
 CVTKPlugin_IExport
 CvtkPolyDataAlgorithm
 CvtkProperty
 CvtkSmartPointer
 CVTKViewer_Axis
 CXAO::FieldA geometrical Field
 CXAO::GeometricElementGeneric class to manipulate a topologic element (vertex, edge, face or solid)
 CXAO::GeometricElementListGeneric class to manipulate a list of topologic element
 CXAO::GeometryBase class for geometries
 CXAO::GroupClass to represent a Geometrical Group
 CXAO::MsgBuilderMsgBuilder can be use to easily create messages
 CXAO::StepBase class for steps
 CXAO::TestUtils
 CXAO::XaoDescribes the XAO format
 CXAO::XaoExporterUtil class for import/export XAO
 CXAO::XaoUtilsUtilities class to convert types
 CXAOPlugin_IImportExport